There is a proverb goes that water is life and needless to say that the water must be clean. Therefore, people use different types of filter to get clean and healthy water. The spin-down filter is one of them.

However, if you do not know what a spin-down filter is and how does it work, you are in the right place. In the next portion of the article, we will show you how does a spin-down filter work in detail. You will also find some frequently asked questions about this filter.

What is a spin-down filter?

Before knowing how a spin-down filter works, it is essential to understand what this filter is.

A spin-down filter is also known asa spin-out filter or sediment trap. In the traditional filtration process, a filter can not clean the dust or big particles from the water. In contrast, a spin-down filter can clean water more effectively.It helps to get rid of heavy dirt like sand or chunk of muds or other particles from groundwater.

There is a filter screen attached to it which is made of polyester. This screen plays a vital role in the filtration process. You can find it in three different sizes: 1 inch, 1.5 inches, and 2 inches respectively. The size varies on the amount of water you need to purify.

Through 1 inch, 1.5 inches, and 2 inches 20 gallons, 50 gallons, and 90 gallons of water can pass per minute respectively. On the contrary, you will find cleaner and safer water for you.

How does a spin-down filter work?

Simply in a well water sediment filter, unfiltered water comes in and filtered water out. In between this, there are some steps the water have to go through.

The filter works by the principle of centrifugal force. At first,the water reaches the top of the filter. The top of the filter then diverts the water into the chamber, and thatwater circulates through the transparent housing.

The centrifugal force helps to push out the heavy dirt to the outside of the housing. The sediment trap prevents the dirt or debrisfrom passing through it. As a result, the dirtthen settles down into the bottom. Finally, with the use of a valve, that dirt is collected to exit.

Where to set up a spin-down filter?

This filter generally placed after a pressure tank of a house or a farm for good filtration. You can also set it up in your home water plant. The industrial use of this filter is also widespread.

As this filter collects the heavy dirt like sand and rust chunks, it does not work to filter any tiny impurities. It is set to purify water of a building, a farm or even a city. It is known as whole-house filtration.

What are the benefits of spin-down filter?

Some of the usefulness of Spin-down filter includes are as follows:

• There is no need to change cartridges.

• The frozen deposit can be easily flushed off.

• There is a scope to set up the auto flush valve.

• It protects the softener or iron filter regulator valves from harmful sand or larger particles.

Why is ita better choice?

A spin-down filter is a better choice because it does not clog too fast like filter cartridge.A filter cartridge can take out a lot of sediments but cannot take out sand or larger particle. On the other hand, the spin-down filter can take out larger particles or residue.

Therefore due to the drawbacks of the filter cartridge, the backwash control valve can get ruin.

FAQ

What does the whole house filtration system mean?

The whole house filtration system removes impurities from the water with the help of a filter that is connected to the central water line of your building or farm.

How does the whole house filtration system work?

Whole-house filtration system allows all of the water to pass through the filter that will come to your building or farm. The water will not be supplied into your kitchen or toilets without this filtration system.

What are the different types of whole house filtration system?

There are three types of a whole house filtration system. These are Reverse Osmosis, Under Sink, and Countertop. Among these three systems, Reverse Osmosis cost the most and Countertop cost the least.

Does well water needa spin-down filter?

The impurities of water cannot be seen easily, whether it is well water or city water. So, well water also requires spin-down filtration to make it safe for cleaning, cooking, and drinking.

What is the ideal size ofthe spin-down filter for household use?

For household use,the proper size of the spin-down filter is 3/4” or 1” because irrigation and other high water flow are not required during household work. 

How to clean a spin-down filter?

A spin-down filter should be cleaned if the filter is clog due to heavy dirt. If the filter gets clog frequently, then the water may need extra filtration.

The steps that are to be followed to clean a spin-down filter are:

1. Firstly, the filter housing is to be removed.

2. Secondly, the filter screen is to be removed.

3. Thirdly, the filter screen is to be brushed or scrubbed with the help of a brush.

4. Finally, the removed parts are to be put together.

What to do if the water flow is not proper?

It is common not to have proper water flow always. Therefore to have adequate water flow the filter screen might also have to exchange.

Why does a spin-down filter get clog frequently?

A spin-down filter gets clog because of two reasons. First, the mesh size may be wrong. Second, the dirt particle may not be removed on time.

How to select the right mesh size?

The right mesh size depends on the dirt or massive particle that is to be removed from the water. The ideal size of a filter screen is 100 mesh (about 150 microns).

So the smaller the mesh number, the larger the particle it will catch. On the other hand, the larger the mesh number, the smaller the particle it will catch.Mesh size 24, 30, and 40 are for general use and mesh size 1000 is used for ultra-filtration.

Conclusion

In a nutshell, the spin-down filter is a very useful water processing equipment. This is essential for every house and farm. Without it, the water that we will use can be very much harmful to our health.

The filter is also light-weighted. So it can be supported by the pipe in which it is set up, and no support is required. So now you know how does a spin-down filter work. Are you the next to install it in your house?